Commercial window tinting for offices, shopfronts and clinics, using solar control, privacy and safety films chosen to suit your glass type and window orientation. Every job starts with an on-site glass assessment.
Request a Free Quote
Your reception desk faces west, and by mid-afternoon staff are squinting at screens while the air conditioner works hard to keep up. Commercial window tinting addresses that with solar control film applied to the inside of your existing glass. Depending on the site, we work with spectrally selective films, reflective and dual-reflective films, frosted and decorative privacy films, and safety films. The right choice depends on your glass type, which way the windows face, and what you need the film to do, so we assess every site before recommending a product.
Conditions in Brisbane Northside shape how we approach a commercial job. Strong subtropical sun on north- and west-facing glazing drives heat gain and fades stock, signage and furniture. Humidity affects how slip solution behaves under the film during installation. Summer storms also make some owners consider safety film, which is designed to help hold broken glass together. We check for laminated, toughened, tinted and low-e glass, and for double glazing, because some film and glass combinations raise the risk of thermal stress cracking. When a film isn't suitable for a pane, we tell you.
A typical job might be a shopfront where the owner wants less glare on the display without hiding the stock from the street. It might be a medical suite that needs frosted privacy film on consult room windows, or an upstairs office that turns into a hothouse every summer afternoon. We work around trading hours where we can and keep the work area tidy, so your business can keep operating. If you also want your home done, our residential window tinting service uses the same assessment-first approach.
From glass assessment to the final trimmed edge, here's what happens on site.
We walk the building and note which windows face the harshest sun, where glare or privacy is a problem, and what type of glass is fitted in each frame. We check for laminated, toughened, low-e and double-glazed units, along with any existing film. This tells us which films are suitable for each pane and which ones to avoid.
We show you film samples against your actual glass so you can see the shade, reflectivity and view-through from inside and out. We explain the trade-offs, such as how a darker or more reflective film changes night-time visibility. You then choose a film based on how the space is used.
We protect sills, carpets and nearby desks with drop sheets, then strip any old film and adhesive residue. Each pane is scraped with a razor blade scraper and washed down so dust and grime don't get trapped under the new film. Seals and frame edges are cleaned so the film can sit close to the edge.
Film is cut to size, laid onto glass wet with slip solution, and squeegeed firmly to push out water and air. We trim the edges with a sharp blade for a neat finish against the frame. We then inspect each pane and give you care instructions for the drying period.
Practical improvements for staff, customers and stock, depending on film and glass.
Solar control film helps reduce the heat coming through sun-facing glass, so the afternoon side of the office is easier to work in. Staff near the windows spend less time adjusting blinds or moving desks. How much difference you notice depends on the film, the glass and the window orientation.
Strong sun bleaches shop displays, signage, carpet and timber furniture over time. Window film helps cut glare and reduce the UV that contributes to fading. Customers can see your products clearly, and staff can read screens without squinting.
Frosted and decorative films let light into meeting rooms and consult rooms while screening them from view. Safety film is designed to help hold glass fragments together if a pane breaks. You get practical protection while keeping rooms bright.
We don't recommend a film until we know what glass it's going on. Checking for laminated, toughened, low-e and double-glazed units helps reduce the risk of film-related glass problems. If a pane isn't suited to film, we say so.
Western afternoon sun and long summer days put heavy heat load on commercial glazing across the northside. We consider each window's orientation when recommending film, rather than applying one product to the whole building. That helps you get a sensible result on every side.
A shopfront, a medical suite and an open-plan office each need something different. We weigh visibility, privacy, glare, heat and night-time appearance against your priorities. You see samples on your own glass before you decide.
We protect floors, sills and desks, keep tools contained and clean up as we go. Edges are trimmed neatly against the frames for a tidy finish. Your staff and customers can get on with their day while we work.
Common questions answered
Not always. Some combinations of film and glass, particularly with certain laminated, low-e or double-glazed units, can increase the risk of thermal stress cracking. We check the glass type and orientation of each pane before recommending a film.
The main factors are the total glass area, the type of film, how easy the windows are to reach, and whether old film needs removing first. Large panes, high windows that need ladders or access equipment, and decorative or cut designs take more time. We give you a quote after we've assessed the site.
In many cases, yes. We work in sections, protect desks and floors, and can plan around trading hours where possible. Let us know about busy periods or quiet days when you request a quote.
Humidity affects how the slip solution behaves and how long water takes to leave from under the film. You may see slight haziness or small water pockets for a while after installation, which is normal as the film dries. We explain what to expect for the film we've used and when it's safe to clean the glass.
Use a soft cloth or squeegee with a mild, non-abrasive cleaner, and avoid razor blades or scourers on the film side. Wait until the film has fully dried before cleaning, and brief your cleaners so they know which panes are filmed. We give you care instructions at the end of the job.
We provide Commercial Window Tinting throughout Brisbane Northside, QLD and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All AreasExplore our other services
